Description

For added blade stability whilst operating your mill, our mills all come standard with a slide guide that slides in and out depending on your cutting width.

GT26 Deluxe Portable Sawmill Trailer Model Features

Power 14HP Kohler Pro Command Petrol Engine- Electric Start
Log Diameter Capacity 28″ (711.2mm)
Log Length Capacity 5.1 metres
Distance Between Blade Guides 24″ (609.6mm)
Maximum Cut Depth 18″ (457.2mm)
Maximum Cut Width 24″ (610mm) Square Cant or 24″ (610mm) Live Edge
Last Cut Off Deck 1″ (2.5cm)
Track Rail Construction 2.5″ x 4″ (63mm x 100mm) Galvanised Steel Rails
Track Log Bunks (Rectangle Tube Steel) 3″ x 6″ (75mm x 150mm) Powder Coated
Stainless Steel Log Bunk Cover Optional
Levelling Feet Set of 18 Included
Log Clamps Screw Two Set
Head Design 2″x4″ (50mm x100mm) RHS 4 Post
Band-wheel Diameter 19″ (48cm)
Blade Size Lenox 1.25″ Width x 146″ Length x 1″ Pitch (32mm x3708.4mm x 25.4mm)
Blade Engagement System Centrifugal Clutch
Lubricant Tank 10 Litre Plastic
Finish Powder Coat Paint / Galvanised Steel
Sawmill Warranty 2 Year Parts Warranty
Engine Warranty 3 Year Warranty (Offered directly through Kohler)
Shipping Weight (450 kg)

The only ADR approved sawmill trailers available in Australia.

* The Australian Design Rules (ADRs) are national standards for vehicle safety, anti-theft and emissions. When a road vehicle is first used on Australian roads the relevant state or territory government’s legislation generally requires that it continue to comply with the relevant ADRs as at the time of manufacture.

KOHLER CH440 (14HP) SINGLE CYLINDER PETROL ENGINE ELECTRIC START

This Kohler CH440 petrol engine features a 4-cycle, slant cylinder design, with a cast iron cylinder bore and overhead valve for easy access. The Quad-Clean™ 4-stage air filtration system ensures only clean air enters the engine for maximum power and life of the engine. In addition, this engine is backed by a 3 year commercial warranty

Typical Applications :- Typical applications for this Kohler engine include :- Concrete Trowells, water pumps, Hydraulic power packs etc

ENGINE SPECIFICATIONS

Gross Horsepower of 14HP (429cc)
Oversized muffler with heat shield
Industry standard PTO face
Quad-Clean™ heavy-duty cyclonic air cleaner
Overhead valve design
Easy access throttle, choke and shutoff
Cast Iron Sleeve
Shaft Size – 1 Inch Keyway Shaft
Model Number – CH440
3 Year Commercial Warranty

Use your blade for approx. 2.5hrs and re sharpen. You will get up to 5-7 resharpens depending on what you are cutting. If you want to work for a full day take three blades with you and give them a re-sharpen that night and you are good for the next day.

Re-sharpening time for one blade is approx. 20mins.