Greentec 952MEGA motor

Category: Wood Chippers

Description

Greentec 952MEGA Motor – Power, Control, and Efficiency in One Package

The Greentec 952MEGA Motor is built for serious chipping performance, combining intelligent controls with a heavy-duty design to handle high workloads with ease.

Key Features

Greentec Control System (GCS)
Operate with precision using the compact touchscreen control system, designed for easy adjustments on the go.
Hydraulically Tilting Venturi Discharge Chute
The chute tilts at the touch of a button, allowing quick access to the sieve unit for maintenance or replacement.
Adjustable Hydraulic Infeed Table
A stable, raisable infeed table with multiple position settings makes it easier to handle different log sizes and working conditions.
Hydraulic Pipe Movement + Electric Deflector
The discharge pipe moves up and down hydraulically, while an electric deflector lets you direct chips exactly where needed.
Venturi + Integrated Blower System
This dual-system setup delivers a strong, continuous airstream for efficient chip discharge, even with damp or dense material.
Hydraulic Braking System
Equipped with hydraulic brakes for safe, controlled operation when on the move.

Integrated blowing system which, in combination with Venturi blowing system guarantees a powerfull airstream.
red = powerfull airstream
blue = under pressure/vacuum
yellow = wood chips

Upper feed roller internally driven by a heavy poclain motor.

Knives are easy accessible, under a hinged cover, on the top of the machine.

Venturi discharge chute can be tilted hydraulically,.

Options

Infinitely adjustable flexar reversal fin, saves fuel and reduces noise
Automatic hydraulically enabled clutch
Closed infeedchain
Different crane and crane control options
Chassis air brakes instead of hydraulic brakes
Different lighting and support leg options chassis

Versions

Available with John Deere 275 HP or 420 HP.
Available with 2 or 4 rollers.

Venturi discharge chute can be tilted hydraulically,.

GCS control – Greentec Control System

The Greentec Control System is a compact, stainless-steel touchscreen interface designed exclusively for Greentec machines. It offers pre-set programs for different wood types, allowing instant adjustment of key settings like infeed speed, top roller pressure, no-stress timing, and reverse feed.

With a quick switch to low engine speed, operators can save fuel, reduce noise, and produce coarse chips with minimal fines. The system responds to both drum speed and hydraulic pressure for precise control.

Built for reliability, it features vulcanised, maintenance-free controllers, minimal cabling via a Canbus system, and waterproofing to IP67. Available in 5 languages, the GCS Control combines simple operation with maximum durability.

Closed infeedchain

Features

Greentec Drum Woodchipper – Tough, Efficient, and Built to Last

Smart, No-Fuss Design

The Greentec woodchipper is made for serious work without unnecessary complications — chipping at the front, discharge at the back. Its own hydraulic cooling system uses Venturi airflow for efficient heat control, while the new rotor housing includes a wear plate under the shredder drum for extra durability.

An integrated blower system, combined with Venturi airflow, delivers a powerful, consistent airstream for smooth chip ejection. With no jacks or accelerators to damage chips, you get uniform, low-dust woodchips, reduced wear, lower fuel use, and higher efficiency.

Drum System

4 precision knives mounted along the drum with blower blades on both sides.
Bottom knife positioned below the cutting knife for easy access.
Specially engineered anvil knife cuts small branches at an optimised angle for improved chip quality.

Infeed System

Lowered bottom roller table provides more clearance for clamps to handle larger logs.
Upper infeed rollers on both sides powered by high-torque motors with sealed oil bearings (low maintenance).
Bottom infeed roller driven by a heavy-duty motor with oil-lubricated bearings for maintenance-free operation.

Premium Build Quality

Built from S355 (52-3) premium structural steel for strength and longevity.
Hardox steel teeth on infeed rollers for years of aggressive feeding performance.
Replaceable Hardox wear plates fitted under the drum and at the discharge chute for extended service life.
Double powder-coated after sandblasting for superior corrosion resistance.
All components — bearings, hydraulic valves, engines, and pumps — are chosen for durability.

Easy Maintenance

Knives accessed under a hinged top cover for quick servicing.
Drum can be locked securely when changing knives.
Knife adjustments are fast and accurate with the supplied ruler.
Adjustable, reversible anvil knife can be used four times before replacement.
All grease points are positioned for easy access.

Technical Specifications

	2-rollers	4-rollers
Infeed opening	600 x 1060 mm	600 x 1450 mm
Feed opening channel	550 x 1060 mm	550 x 1060 mm
Max. infeed hardwood	Ø 350 mm	Ø 350 mm
Max. infeed softwood	Ø 520 mm	Ø 520 mm
Drum	960 x 930 mm	960 x 930 mm
Upper roll	Ø 500 x 1060 mm	Ø 500 x 1060 mm
Lower roll	Ø 300 x 1060 mm	Ø 300 x 1060 mm
Standing roles		Ø 300 x 610 mm
Knives	4	4
Anvil knives	1	1
Capacity	150 m3/hour	150 m3/hour
Size L x B x H	5200 x 2460 x 330	5200 x 2460 x 3300
Weight	8900 kg	9300 kg

Feature
Parabolic spring suspension
Emergency stop at both sides and in front at the engine
Heavy hydraulic support leg under the drawbar for easy attaching and detaching
Discharge chute
Equipped with replaceable wear plate
Hydraulic discharge pipe rotation
Hydraulic spreader valve adjustment
Hydraulic discharge pipe adjustment up and down for transport
Venturi discharge chute can be tilted hydraulically, for easy replacing of the sieve unit
Screenunit
Knives are easy accessible, under a hinged cover, on the top of the machine
Simple locking strainer unit by means of 1 pin
Screenunit made of hardox
Different screenunits oa. 50 mm- 70 mm and open